Utilisation of Small Industrial Solid Waste Welding Workshops Carbide as a Raw Material for Gypsum (CaSO4) Production
Downloads
In order to increase the effectiveness of the clean production program in the small carbide welding workshop industry, it is necessary to make efforts to reduce the existence of the waste produced because it pollutes the soil, water and air environment. To minimize the presence of waste, research was carried out by utilizing solid carbide welding waste as a raw material for making gypsum (CaSO4) which is widely used for industrial needs. The implementation is by reacting the waste with various concentrations of H2SO4 solution by adjusting the reaction time and reaction temperature. The results of the initial analysis of carbide welding workshop solid waste in the form of Ca(OH)2 slurry contained relatively high levels of CaO, namely 71.58%. From the results of the research that has been done, it can be concluded that the largest conversion value of 34.98% was obtained by using 12N H2SO4 with a reaction temperature of 50oC and a reaction time of 40 minutes.
Fernando,N.J. (2012) Kajian Eksperimen Genteng Hasil Daur Ulang Kotak Minuman Dengan Ukuran Cacach campuran 75 mm x 5 mm dan 50 mm x 5 mm . Sekripsi tidak diterbitkan. Depok: PPs Universitas Indonesia.
Dewi,N.R., Ashari, M., Dermawan, D. (2018) Studi Pemanfaatan Limbah B3 Karbit dan Fly Ash Sebagai Bahan Campuran Pembuatan Beton Siap Pakai (BSP) . Study Kasus Di PT . Varia Usaha Beton .Politeknik Perkapalan Negeri Surabaya. Surabaya.
Ian Syahrial, H., Suprapto. (2016) Pengaruh Penambahan Limbah Gas Asetilen Sebagai Pengganti Fly Ash Terhadap Kualitas Genteng Beton Sesuai Dengan SNI 0096: 2007. Rekayasa Teknik Sipil Vol.7 , No.1/rekat/ 16(2016) . 01 – 06.
Nuris Sidah, P., Moch. Lukman, A., Ridho, B . Conference Proceeding on Waste Treatment Technology. Progrsm Studi D4 Teknik Pengolahan Limbah. Politeknik Perkapalan Negeri Surabaya. ISSN . No. 2623 – 1727. Hal 7 – 11.
Arief Krim,H.M., Heni Junia. (2018) Pemanfaatan Limbah Karbit Sebagai Adsorben Penurunan Kandungan Logam pada Pengolahan Limbah Cair Pencucian Kain Tenun. Diatilasi, Vol.3, No.2, September 2018, Hal. 1 – 9.
Sani . Pemanfaatan Limbah Padat Pabrik Gas Asetilen dan Limbah Cair Pabrik Soda Untuk Pembuatan CaSO4. Jurnal Ilmiah Teknik Linkungan UPNV Jawa Timur . Vol 1. No.1. Hal 58 - 66
https:// id. Wikapedia. Org > wiki > Kalsium_Karbida. Diunduh tanggal 5 Oktober 2022.
[8] Hawley, G.G. (1971) The Condensed Chemical Dictionary, Eighth Edition, Van Nostrand Reinholh Company.
Vogel. 2005. Bulu Teks Analisis Anorganik Kualitatif Makro dan Semimikro. Edisi ke lima. PT. Kalman Media Pustaka. Jakarta.
Perry,R.H., and Green,D.w. (2008) Perry’s Chemical Engineers, 7 th ed McGraw Hill Companies Inc-USA.
Kirk, R.E., and Othmer, O.F. (1988) Encyclopedia of Chemical Tecnology. 4 th ed The Interscience Encyclopedia, Inc, New York.
Austin,G.T. (1985) Shreve’s Chemical Process Industries. Fifth edition. Mc Graw-Hill Book Company .
Naini , A., Rahmawati, D.(2010) Composition Analysis of Calcium and Sulfur on Gypsum at the Purger District Jember Regency as an Alternative Gypsum Dental Material. Dentika Dental Jurnal, 2010; 15(2); page 179-183.
Widya,P.S., Satria,Y.,Fitria,C. (2021) Uji Komposisi Gipsum tipe III Pabrikan dan Gipsum Tipe III Daur Ulang Dengan Teknik X-RAY Fluoresence Spectrometer (XRF) Dalam Upaya Pemanfaatan Limbah Gipsum Kedokteran Gigi. Menara Ilmu, Vol.XV, No. 01, Januari 2021. ISSN, 1693-2617. LPPM.UMSB, page 1-5.
Smith,J.M. (1981) Chemical Engneering Kinetics. Third Edition . International Student Edition. McGraw-Hill Chemical Engneering Series.
