CFD Analysis of Centrifugal Pump with Impeller Made of Various Materials
Downloads
The purpose of this study is to model and simulate CFD in centrifugal pump with different impeller material. Using CFD technique impeller with four different materials are analysed and compared. Aluminium, steel ,T300 and glass fibre are the four materials are used for study. T300and glass fibbers are belong to composite fibre (additive manufacturing). From result, data is compared and performance of centrifugal pump with impeller made by additive materials are compared with steel and aluminium. Results shows that composite materials (T300 and Glass fibre give performance as same as steel , so composite material or additive manufacturing for impeller can replace conventional metals like steel and aluminium.
Incremental sheet forming of composite material Aditya Kharche, Shivprakash Barve ⇑ School of Mechanical Engineering, Dr. Vishwanath Karad MIT World Peace University, Pune, 411038, India
Rapid Prototyping and Manufacturing: A Review of Current Technologies Conference Paper · January 2009 DOI: 10.1115/IMECE2009-11750
A Review paper on 3D-Printing Aspects and Various Processes Used in the 3D-Printing by Vinod G. Gokhare and Dr. D. N. Raut, and Dr. D. K. Shinde, International Journal of Engineering Research & Technology (IJERT) http://www.ijert.org ISSN: 2278-0181 IJERTV6IS060409
3D Printing Technology, Material Used For Printing and its Applications, Article in International Journal of Scientific and Engineering Research · July 2020 , by Ajay Shinde, Ashutosh dandekar, Rahul Patil, Nandakishor dhavale
The Impact and Application of 3D Printing Technology Article in International Journal of Science and Research (IJSR) · June 2014 by Cephas Mawere Harare Institute of Technology.
3D Printing of Physical Organ Models: Recent Developments and Challenges Zhongboyu Jin, Yuanrong Li, Kang Yu, Linxiang Liu, Jianzhong Fu, Xinhua Yao, Aiguo Zhang,* and Yong He* Advanced Science published by Wiley-VCH GmbH
3D Printed Contact Lenses Article in ACS Biomaterials Science and Engineering · January 2021 by Fahad alam, Mohammed elsherif, Badar Alqattan, Ahmed E salih
Chitin- and Chitosan-Based Composite Materials Inmaculada Aranaz 1,2,* and Niuris Acosta Biomimetics 2022, 7, 1. https://doi.org/10.3390/biomimetics7010001
Comparison of 3d printing Composites material with 3d printed plastic material for rapid prototyping, JECET; March 2022-May 2022; Sec. A; Vol.11. No.2, 318-323. . E-ISSN: 2278–179X [DOI:
24214/jecet.B.11.2. 31823]
CFD simulation of a centrifugal pump impeller with variations of number of blades july 2018 the journal of engineering and exact sciences 4(2):0220-0
