Improvement Recommendation Map Proposed (Future State Map) Housing Construction Process in Low-Cost Housing
Downloads
Based on the two (two) root causes of waste, it is suggested that improvements be made by implementing a more effective and efficient house construction procedure. The contractor will run the Pull System (Kanban System) for the projected development in question. Production Kanban, Withdrawl Kanban, and Signal Kanban are the three sorts of cards that can be used, and they are all kept in the contractor's office as Kanban Post. To deal with material supply difficulties, logistics operators might use Supermarket and FIFO (First In First Out) systems. All of these ideas are poured into a future state map (Future State Map) of the house-building process in Low Cost Housing.
A Focus Group Discussion was used to validate the suggested future state map, which led to the conclusion that the proposed change could be implemented. However, the Pull System, Supermarket System, and First in First Out (FIFO) presented in the process of creating houses in Low-Cost Housing still need to be improved.
Arleroth, J., Kristensson, H., (2011), Waste in Lean Construction – A case study of a PEAB construction site and the development. Thesis in the Master of Supply Chain Management. Chalmers University of technology.
Rother Shook. (2009). Value Stream Mapping.
http://courses.washington.edu/ie337/Value_Stream_Mapping.pdf
Shima Ghavami Modegh ,(2013), An Evaluation of Waste in Steel Pipe Rack Installation, Proceedings IGLC-21, Fortaleza, Brazil.
Shou Wenchi, Jun Wang, Xiangyu Wang & Heap-Yih Chong. 2015, ‘An Application of Value Stream Mapping for Turn Around Maintenance in Oil and gas Industry: Case Study and Lessons Learned’, Raidén, A B and Aboagye-Nimo, E (Eds) Procs 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 813-822.
What is Pull System, Details & Benefits, https://kanbanize.com/lean-management/pull/what-is- pull-system/
Yu, Haitao & Al-Hussein, Mohammed. (2009). Development of Lean Model for House Construction Using Value Stream Mapping. Journal of Construction Engineering and Management