The Environmental and Socio-Economic Imperative for Waste Lubricating Oil Re-Refining in Developing Economies: A Case Study of Nigeria
Downloads
The exponential growth in motorized transport and industrial machinery has led to a significant rise in the consumption of lubricating oils globally, with developing nations such as Nigeria contributing substantially. As lubricating oils reach the end of their service life, they transform into hazardous waste lubricating oils (WLOs), posing significant threats to the environment and public health when improperly disposed. The rapid industrialization and urbanization of developing economies have precipitated a surge in lubricant consumption, generating substantial volumes of hazardous waste lubricating oil (WLO). This study examines Nigeria as a critical case study, where 287.465 million liters of WLO are projected for 2025 amidst inadequate management infrastructure. Annually, approximately 35 million metric tons of lubricants are consumed worldwide, with about 17.5 million metric tons returning as waste. Through integrated analysis of environmental science, circular economy principles, and policy frameworks, we demonstrate that WLO re-refining presents a triple-win solution: mitigating severe ecological contamination, reducing dependence on imported base oils, and unlocking significant socio-economic value. Our findings reveal that implementing re-refining could satisfy 40% of Nigeria's lubricant base oil demand, create jobs, reduce CO₂ emissions by 1.8 million tons annually, and contribute to GDP growth. We propose a phased implementation roadmap integrating technology selection, policy incentives, and stakeholder collaboration, providing a transferable model for resource constrained economies grappling with hazardous waste management.
It explores the environmental consequences of indiscriminate disposal, highlights the potential of re-refining as a circular economy strategy, and evaluates the opportunities for energy savings, economic diversification, job creation, and import substitution. The paper also compares Nigeria’s current policies with global best practices and proposes a framework for sustainable WLO management, emphasizing the need for investment, regulation, and awareness to transform waste into wealth.
Abdulkareem, A. S., Afolabi, A. S., Ahanonu, S. O., & Mokrani, T. J. E. S. (2014). Effect of treatment methods on used lubricating oil for recycling purposes. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 36(9), 966-973.
Abdel-Jabbar, N. M., Al Zubaidy, E. A., & Mehrvar, M. (2010). Waste lubricating oil treatment by adsorption process using different adsorbents. International Journal of Chemical and Biological Engineering, 3(2), 70-73.
Abdel-Raouf, M. (Ed.). (2012). Crude oil emulsions: Composition stability and characterization. BoD–Books on Demand.
Adeyemi, A. F., Adebiyi, F. M., & Koya, O. A. (2017). Evaluation of physico-chemical properties of re-refined lubricating oils obtained from fabricated packed bed reactor. Petroleum Science and Technology, 35(16), 1712-1723.
Ahanonu, O. S. (2010). Recycling of used oil. Johannesburg, South Africa: Department of Chemical Engineering, University of Johannesburg.
Ahmed, D. J., Al-Nidawi, M. R., Chali, M., & Bahjat, A. (2016). Purification of Used Lubricating Oils Using Vacuum Distillation. Journal of Petroleum Research and Studies, 14(1), 111-130.
Ajemba, R. O., & Onukwuli, O. D. (2013). Adsorptive removal of colour pigment from palm oil using acid activated Nteje clay. Kinetics, equilibrium and thermodynamics. Physicochemical Problems of Mineral Processing, 49.
Akanda, M. R., Hasan, M., & Rouf, M. A. (2022). Recycling of waste or crude lubricating oil by vacuum distillation to produce reusable lubricants and its economic viability evaluation. Journal of Bangladesh Academy of Sciences, 46(1), 19-29.
Alaqarbeh, M. (2021). Adsorption phenomena: definition, mechanisms, and adsorption types: short review. RHAZES: Green and Applied Chemistry, 13, 43-51.
Al-Bidry, M. A., & Azeez, R. A. (2020). Removal sulfur components from heavy crude oil by natural clay. Ain Shams Engineering Journal, 11(4), 1265-1273.
Ali, E. (2010). USED LUBE OIL RE-REFINING A SUCCESSFUL INVESTMENT PRESENTATION.
Al‐Muslim, H., & Dincer, I. (2005). Thermodynamic analysis of crude oil distillation systems. International Journal of Energy Research, 29(7), 637-655.
Al-Zahrani, S. M., & Putra, M. D. (2013). Used lubricating oil regeneration by various solvent extraction techniques. Journal of Industrial and Engineering Chemistry, 19(2), 536-539.
Amorim, F. A., Welz, B., Costa, A. C., Lepri, F. G., Vale, M. G. R., & Ferreira, S. L. (2007). Determination of vanadium in petroleum and petroleum products using atomic spectrometric techniques. Talanta, 72(2), 349-359.
Andrews, L. (2008). Compendium of Recycling and Destruction Technologies for Waste Oils. United Nations Environment Programme.
Anisuzzaman, S. M., Jumaidi, M. H., & Nasir, N. N. M. (2021, October). Used lubricating oil recovery process and treatment methods: A review. In IOP Conference Series: Materials Science and Engineering (Vol. 1195, No. 1, p. 012031). IOP Publishing.
Anonymous. (2025). Global Lubricant Market Projected to Increase to USD 248 Billion by 2032.
Access Newswire
Antonelli, S., & Borza, M. (1980). Process for regenerating exhausted oils (No. US 4233140).
Arnaout, S. (1997). Options for Vehicle Waste Oil Management in Lebanon. Beirut, Lebanon: Transtec Fitchner Consortium, Ministry of Environment.
Arpa, O., Yumrutas, R., & Demirbas, A. (2010). Production of diesel-like fuel from waste engine oil by pyrolitic distillation. Applied Energy, 87(1), 122-127.
Arunachaleswara, P. R., Kanna, R., Nair, S. G., Francis, C., Bhaktan, N., & Kuruvila, A. (2017).
Effect of Free Water and Rust on Flash Point of Diesel. Int. J. Eng. Sci, 7, 21-24.
ASTM. (1999). ASTM D 1298 Standard test method for density, relative density, or API gravity of crude petroleum and liquid petroleum products by Hydrometer method. Pennsylvania: American Society for Testing Materials.
ASTM D1500, I. U. S. (2012). Standard test method for ASTM colour of petroleum products (ASTM colour scale). Annual Book of Standards.
ASTM D189. (2013). Standard Test Method for Conradson Carbon Residue of Petroleum Products. Annual Book of Standards, 5.
ASTM International. (2010). ASTM D4294-10: Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry. ASTM International.
Bhaskar, T., Uddin, M. A., Muto, A., Sakata, Y., Omura, Y., Kimura, K., & Kawakami, Y. (2004). Recycling of waste lubricant oil into chemical feedstock or fuel oil over supported iron oxide catalysts. Fuel, 83(1), 9-15.
Boadu, K. O., Joel, O. F., Essumang, D. K., & Evbuomwan, B. O. (2019a). A review of methods for removal of contaminants in used lubricating oil.
Boadu, K. O., Joel, O. F., Essumang, D. K., & Evbuomwan, B. O. (2019b). Physico-chemical and concentration of heavy metals analyses in Virgin and used lubricating oils: a spectroscopy study.
Bobde, P. S. B., Admane, M. A. B., Kalekar, M. N. N., & Jadhav, M. N. N. (2019). Experimental study on re-refining of used lubricating oil. Int. J. Res. Advent Technol., 7(4), 490-494.
Boise State University. (n.d.). Circular Economy in Oil & Gas Industry.
https://www.boisestate.edu/cobe/blog/2025/02/circular-economy-in-oil-gas-industry/
Bolis, V. (2013). Fundamentals in adsorption at the solid-gas interface. Concepts and thermodynamics. Calorimetry and thermal methods in catalysis, 3-50.
Boughton, B., & Horvath, A. (2004). Environmental assessment of used oil management methods.
Bridjanian, H., & Sattarin, M. (2006). Modern recovery methods in used oil re-refining. Petroleum & Coal, 48(1), 40-43.
Brown, S. F. (2015). Base oil groups: manufacture, properties and performance. Tribology & Lubrication Technology, 71(4), 32.
Bufares, A. M., Abdalla, A. A., Hashem, G. G., Melad, M. S., & Elabeedy, E. A. (2023). Physical and Chemical Properties of Virgin and Used Engine Oils. International Science and Technology Journal, 32.
Cao, Y., Yan, F., Li, J., Liang, X., & He, B. (2009). Used lubricating oil recycling using a membrane filtration: Analysis of efficiency, structural and composing. Desalination and Water Treatment, 11(1-3), 73-80.
Celia, E., Darmanin, T., de Givenchy, E. T., Amigoni, S., & Guittard, F. (2013). Recent advances in designing superhydrophobic surfaces. Journal of colloid and interface science, 402, 1-18.
Chari, K. R. (2012). Compendium of recycling and destruction technologies for waste oils, UNEP, Japan.
Compere, A. L., & Griffith, W. L. (2009). Third-Party Evaluation of Petro Tex Hydrocarbons, LLC, ReGen Lubricating Oil Re-refining Process (No. ORNL/TM-2009/093). Oak Ridge National Lab.(ORNL), Oak Ridge, TN (United States).
Dang, G. S. (1997). Re-refining of used oils: A review of commercial processes. Tribotest, 3(4), 445-457.
