Analysis Of Multistorey Building Using ETABS
Downloads
The structural safety and performance of multistorey buildings are highly dependent on accurate analysis and design methods. This study focuses on the analysis of a multistorey building using ETABS software. The building, comprising G+10, is analyzed using the linear method to understand its behavior under dead, live, wind, and earthquake load. This study evaluates storey displacement and Storey drift to check safety and serviceability as per IS codes. Linear analysis provides a clear understanding of the structure’s performance under normal conditions, ensuring stability and strength. The research highlights the role of ETABS in modern structural design and demonstrates how linear analysis serves as an essential step in achieving safe and economical buildings.
C. S. S. Shashidhar “Analysis and Design of Residential Building Using Etabs” (2025).
M Shajahan and Kumaran “Analysis and Design of Multi-Storey Building Using Etabs” (2016).
P. K. Sahu and A. Chaturvedi “Seismic Analysis of Tall Multistorey Structure Considering Variable Column Condition Using ETABS” (2024)
S. Sapkota, S. K. Yadav, R Ahmed and C Taku “Dynamic Analysis of Regular and Irregular Building using ETABS” (2022)
A. R. Kondekar and R. A. Deshpande “Linear and Nonlinear static analysis of G+11 RCC building using Etabs software” (2022)
K. Senthikumar “Analysis and Design of multi-storey building using Etabs software and comparing with Different Zones” (2022)
P Lavanya, P Sridhar and V Manasa “Comparative study of linear static analysis of G+10 storey building with and without shear wall in Etabs” (2022)
Kalpak A. Z, Aniket P and Abhijeet G “Linear Dynamic Analysis of High-Rise Building Using Etabs” (2021)
Mehmet G. G and Kadir G “The Effect of Story Drifts in Determining the Earthquake Performance of High-Rise Building” (2024)
Vidhya P, and Archana S “Comparative Study on Seismic Analysis of Multi Storied Buildings with Composite Columns” (2017)
Nayan C and Manish D M “A review for Design of residential Building using Etabs” (2016)
D.Haritha, P. Anuf kumar, K. Nagaraju, P. Sai gopi, S. Nagaragu and M. Rajesh “Analysis of Multi-Storye Building Using E-Tabs Software” (2021)
P. Koteswara Rao and A. Dhana Laxmi “Design and Analysis of Multi Storeyed Building Under Static and Dynamic Loading Conditions Using With E-Tabs” (2021)
Rajendra K K and Prof. Anubhav Rai “Seismic Behaviour of RC Multistorey Building Frame Structure with Different Plan Configuration” (2025)
Gauri G. K and Dr. A. R. Mundhada “Comparative Study of Static and Dynamic Seismic Analysis of Multistore RCC Buildings by ETAB” (2017)
[16] Bureau of Indian Standards (2000). IS 456: Code of Practice for Plain and Reinforced Concrete. New Delhi, India.
Bureau of Indian Standards (1987). IS 875 (Part 1 & 2): Design Loads for Buildings and Structures – Dead Loads and Imposed Loads. New Delhi, India.
[18] Bureau of Indian Standards (2015). IS 875 (Part 3): Design Loads for Buildings and Structures – Wind Loads. New Delhi, India.
Bureau of Indian Standards (2016). IS 1893 (Part 1): Criteria for Earthquake Resistant Design of Structures – General Provisions and Buildings. New Delhi, India.
