A Comprehensive Review of Global Waste Lubricating Oil Re-Refining Technologies: Mechanisms, Performance, and Environmental Footprint
Downloads
The global demand for lubricants, driven by industrial expansion and a growing vehicle fleet, has led to a significant increase in the generation of waste lubricating oil (WLO). This waste presents a formidable environmental challenge, particularly in developing economies where indiscriminate disposal leads to severe contamination of water, soil, and air with toxic and carcinogenic compounds. In response to these pressures, the re-refining industry has emerged as a crucial component of a global circular economy, transforming this hazardous waste into a valuable resource. This article presents an in-depth comparative analysis of the diverse technologies employed globally for the re-refining of WLO. It systematically examines processes such as acid clay, hydrogenation, solvent extraction, and thermal methods, evaluating their respective mechanisms, technical performance, and environmental footprints. The analysis highlights a clear technological evolution from environmentally problematic methods, such as the acid-clay process, toward more sophisticated and sustainable approaches like hydrogenation and advanced distillation. It systematically describes their mechanisms, evaluates their performance in terms of product quality and yield, and assesses their environmental footprints. The findings and analysis demonstrate that this combined process effectively removes contaminants, producing lubricating base oil and diesel of comparable quality to commercial-grade products. This study not only reaffirms the technical viability of WLO re-refining but also underscores its vital role in achieving resource conservation, economic resilience, and environmental preservation on a global scale.
Abdulkareem, A. S., Afolabi, A. S., Ahanonu, S. O., & Mokrani, T. J. E. S. (2014). Effect of treatment methods on used lubricating oil for recycling purposes. Energy Sources, Part A:
Recovery, Utilization, and Environmental Effects, 36(9), 966-973.
Abdel-Jabbar, N. M., Al Zubaidy, E. A., & Mehrvar, M. (2010). Waste lubricating oil treatment by adsorption process using different adsorbents. International Journal of Chemical and Biological Engineering, 3(2), 70-73.
Alaqarbeh, M. (2021). Adsorption phenomena: definition, mechanisms, and adsorption types: short review. RHAZES: Green and Applied Chemistry, 13, 43-51.
Al-Bidry, M. A., & Azeez, R. A. (2020). Removal sulfur components from heavy crude oil by natural clay. Ain Shams Engineering Journal, 11(4), 1265-1273.
Anisuzzaman, S. M., Jumaidi, M. H., & Nasir, N. N. M. (2021). Used lubricating oil recovery process and treatment methods: A review. IOP Conference Series: Materials Science and Engineering, 1195(1), 012031.
Audibert, F. (2011). Waste engine oils: rerefining and energy recovery. Elsevier.
Awaja, F., & Pavel, D. (2006). Design aspects of used lubricating oil re-refining. Elsevier.
Bhaskar, T., Uddin, M. A., Muto, A., Sakata, Y., Omura, Y., Kimura, K., & Kawakami, Y. (2004). Recycling of waste lubricant oil into chemical feedstock or fuel oil over supported iron oxide catalysts. Fuel, 83(1), 9-15.
Bridjanian, H., & Sattarin, M. (2006). Modern recovery methods in used oil re-refining. Petroleum & Coal, 48(1), 40-43.
Dang, G. S. (1997). Rerefining of used oils—A review of commercial processes. Tribotest, 3(4), 445-457.
Demirbas, A., Baluabaid, M. A., Kabli, M., & Ahmad, W. (2015). Diesel fuel from waste lubricating oil by pyrolitic distillation. Petroleum Science and Technology, 33(2), 129-138.
EL-Seesy, A. I., El-Zoheiry, R. M., & Ali, M. I. H. (2025). Recycling of waste lubricant oil using two-step pyrolysis to produce fuel-like diesel and enhancing its combustion and emission parameters in diesel engines using linseed biodiesel. Energy Conversion and Management: X, 100924.
Emam, E. A. (2018). Clay adsorption perspective on petroleum refining industry. Industrial Engineering, 2(1), 19-25.
Emam, E. A., & Shoaib, A. M. (2013). Re-refining of used lube oil, i-by solvent extraction and vacuum distillation followed by hydrotreating. Petroleum & Coal, 55(3).
Giovanna, F. D., Khlebinskaia, O., Lodolo, A., & Miertus, S. (2003). Compendium of used oil regeneration technologies. United Nations Industrial Development Organization and International Centre For Science and High Technology, Trieste.
Gu, S., Kang, X., Wang, L., Lichtfouse, E., & Wang, C. (2019). Clay mineral adsorbents for heavy metal removal from wastewater: a review. Environmental Chemistry Letters, 17, 629-654.
Himma, N. F., Prasetya, N., Anisah, S., & Wenten, I. G. (2019). Superhydrophobic membrane: progress in preparation and its separation properties. Reviews in Chemical Engineering, 35(2), 211-238.
Hsu, C. S., & Robinson, P. R. (2019). Lubricant processes and synthetic lubricants. Petroleum science and technology, 253-285.
Jurny, M., Elbourawi, M., & Zorgani, E. E. (2023). Recycling of Used En-gine Oil Using Extraction by Single Solvent.
Kajdas, C. (2000a). Major pathways for used oil disposal and recycling. Part 1. Tribotest, 7(1), 61–74.
Kajdas, C. (2000b). Major pathways for used oil disposal and recycling. Part 2. Tribotest, 7(2), 137–153.
Kajdas, C. (2014). Re-refining Technologies. Encyclopedia of Lubricants and Lubrication, 1554–1569.
Kandasamy, S. K., Bakkiyaraj, M., & Gara, D. K. (2025). Thermal cracking of effective decontamination and recycling of lubricating oil: mechanisms, conditions, and performance enhancements. Materials Research Express, 12(1), 015506.
Kanna, R., Joy, J., & Vijayan, S. (2017). Determination of aniline point of petroleum samples. Int Refereed J Eng Sci, 6, 18-21.
Kupareva, A., Mäki‐Arvela, P., & Murzin, D. Y. (2013a). Technology for rerefining used lube oils applied in Europe: a review. Journal of Chemical Technology & Biotechnology, 88(10), 1780-1793.
Mohammed, R. R., Ibrahim, I. A., Taha, A. H., & McKay, G. (2013). Waste lubricating oil treatment by extraction and adsorption. Chemical Engineering Journal, 220, 343-351.
Motshumi, J. D., Edison, M. P., Tsietsi, J., & Mansoor, M. (2013). A comparison of waste lubricating oil treatment techniques. In 2nd International Conference on Environment, Agriculture and Food Sciences, Malaysia.
Muralidhara, D. L., Sarkar, G., Narayanan, H., & Gayathri, J. M. R. (2023). Methodologies to Re-refine Used Lubricant Oils. International Journal for Scientific Research & Development, 11(6).
Nixon, H., & Saphores, J. D. (2002). Used oil policies to protect the environment: An overview of Canadian experiences. Traffic And Transportation Studies (2002), 73-80.
Oduola, M. K., & Okwonna, O. O. (2016). Kinetic modelling of the adsorption treatment of waste lubricating oil using activated ukpor clay (bentonite). International Journal of Engineering Research & Science (IJOER), 2(5), 113-123.
Oladimeji, T. E., Sonibare, J. A., Omoleye, J. A., Emetere, M. E., & Elehinafe, F. B. (2018a). A review on treatment methods of used lubricating oil. International Journal of Civil Engineering and Technology, 9(12), 506-514.
Rahman, M. M., Siddique, T. A., Samdani, S., & Kabir, K. B. (2008). Effect of operating variables on regeneration of base-oil from waste oil by conventional acid-clay method. Chemical Engineering Research Bulletin, 12, 24-27.
Ratiu, S. A., Tirian, G. O., Mihon, N. L., & Armioni, M. D. (2022). Overview on globally applied
used engine oil recycling technologies. IOP Conference Series: Materials Science and Engineering, 1220(1), 012034..
Saleem, H. J., & Karim, A. R. (2020). Re-refining of used lubricating oil by vacuum distillation/thin wiped film evaporation technique. Petroleum Science and Technology, 38(4), 323-330.
Sanchez-Alvarracin, C., Criollo-Bravo, J., Albuja-Arias, D., García-Ávila, F., & Pelaez Samaniego, M. R. (2021). Characterization of used lubricant oil in a Latin-American mediumsize city and analysis of options for its regeneration. Recycling, 6(1), 10.
Sazzad, M.R.I., Rahman, M.M., Hassan, T., Al Rifat, A., Al Mamun, A., Adib, A.R., Meraz, R.M. & Ahmed, M. (2024). Advancing sustainable lubricating oil management: Re-refining techniques, market insights, innovative enhancements, and conversion to fuel. Heliyon, 10(20).
Shihab, E. A., Hassan, K. H., & Abd, A. N. (2019). Determination of carbon residue, ash content,
and concentration of heavy metal in virgin and spent Iraqi lubricating oils. Journal of Biochemical Technology, 10(4-2019), 65-68.
Speight, J. G., & Exall, D. I. (2014). Refining used lubricating oils (Vol. 99). Boca Raton: CRC Press.
Statista, Future Market Insights, & Custom Market Insights. (2023). Global Lubricant Market. (as cited in Oduola and Okwonna 2016).
Treese, S. A., Pujadó, P. R., & Jones, D. S. (Eds.). (2015). Handbook of petroleum processing.
Udonne, J. D. (2011). A comparative study of recycling of used lubrication oils using distillation, acid and activated charcoal with clay methods. Journal of petroleum and Gas engineering, 2(2), 12-1.
Udonne, J. D., Efeovbokhan, V. E., Ayoola, A. A., Babatunde, D. E., Ifeoluwa, A., & Ajalo, I. J. (2016). Recycling used lubricating oil using untreated, activated and calcined clay methods. J. Eng. Appl. Sci, 11(6), 1396-1401.
UNEP (2012): Compendium of Recycling and Destruction Technologies for Waste Oils, International Environmental Technology Centre, Division of Technology, Industry & Economics, United Nations Environment Programme Report.
Widodo, S., Khoiruddin, K., Ariono, D., Subagjo, S., & Wenten, I. G. (2020). Re-refining of waste engine oil using ultrafiltration membrane. Journal of Environmental Chemical Engineering, 8(3), 103789.
Zitte, L. F., Awi-Waadu, G. D. B., & Okorodike, C. G. (2016). Used-oil generation and its disposal along east-west road, port Harcourt Nigeria. International Journal of Waste Resources, 6(1).
