To Study the Effect of Various Fluid Systems on Rate of Heat Transfer For Shell and Tube Heat Exchanger
Downloads
The shell and tube type of heat exchanger module is to be design for lab study of effect of various parameters on rate of heat transfer. The ionic fluid is used to see the difference in outlet temperature of fluid as compared to reference fluid. The cooling fluid is made by adding various amounts of solutes to water and the effect is observed on rate. Also suggestions are made on the nature of heat transfer, rate of heat transfer and improved effectiveness in the rate of heat transfer as compared to the normal process. The conclusions are made about the fluid used , and effect of solute on rate of heat transfer.
International journal of science and research (IJSR)shell and tube heat exchanger performance analysis by Durgesh Bhatt and Priyanka M. Javhar
Journal of Heat and Mass Transfer Research, Investigation of shell and tube heat exchanger by using design of experiment by S. BalamuruganansD.P. Samsoloman.
IJETAE Review paper on design and analysis for shell and tube evaporator for dairy application by Lokhande Hemant kumar and Vishawanath Kumar
Journal of Heat and Mass Transfer Research, Investigation of shell and tube heat exchanger by using design of experiment by S. Balamuruganans D.P. Samsoloman.
H.S. Lee, thermal design, John Wiley and Sons, 2010.
J. França, C. A. Nieto de Castro, M. L. M. Lopes, and V. M. B. Nunes ,“Influence of thermophysical properties of ionic liquids in chemical process design,” J. Chem. Eng. Data, vol. 54, pp. 2569-2575, 2009
IJETAE S.Swaraj Reddy, Taniya Dey, Haribabu K, Harshit Krishna Kumar, Garima Vishal, 2014
Jia-Zhen Yang, Peng Tian, Ling-Ling He, Wei-Guo Xu, “Studies on room temperature ionic liquid”, 110036, pr china, fluid phase equilibria 204 (2003) 295–302
Paisarn Naphon , Tanapon Suchana “Heat transfer enhancement and pressure drop of the horizontal concentric tube with twisted wires brush insert” ,International Communications in Heat and Mass Transfer 38 (2011) 236–241
Yusuf Ali Kara *, € Ozbilen G €uraras “A computer program for designing of shell-and-tube heat exchangers” Turkey Applied Thermal Engineering 24(2004) 1797–1805.
University of Strathclyde, 295 Cathedral Street, Glasgow G1 1XL Department of Pure and Applied Chemistry, Scotland, “New developments in catalysis using ionic liquids”, UK Applied Catalysis A: General 222 (2001) 101–117
Sattar Al-Jabair “Experimental study of thermal performance and heat transfer coefficients shell and helically coiled tube heat exchangers”, HT2012-58004
Dongbin Zhao, Min Wu, Yuan Kou∗, Enze Min Dongbin Zhao, Min Wu, Yuan Kou∗ “Ionic liquids: applications in catalysis”, Enze Min Catalysis Today 74 (2002) 157–189, Catalysis Today 74 (2002) 157–189
John H. Lienhard IV and John H. Lienhard V “A heat transfer textbook third edition” Cambridge MA 02139-4307 U.S.A. Copyright ©2003
R. J. Goldstein *, W. E. Ibele, S. V. Patankar, T. W. Simon, T. H. Kuehn, P. J. Strykowski, K. K. Tamma, J. V. R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki
U. Kortshagen, S. Garrick, V. Srinivasan, Review, “Heat transfer—A review of 2003 literature”, International Journal of Heat and Mass Transfer 49 (2006) 451–534
Urszula Doman´ska “Solubilities and thermophysical properties of ionic liquids” Pure Appl . Chem., Vol. 77, No. 3, pp. 543–557, 2005.
David B. Go, Raul A. Maturana, Timothy S. Fisher,S uresh V. Garimella “Enhancement of external forced convection by ionic wind”, International Journal of Heat and Mass Transfer 51 (2008) 6047–6053
“Ionic Liquids as Environmentally Friendly Solvents in Macromolecules Chemistry and Technology”, Part II, journal of polymers and the environment Volume 19, Number 2, 485-517,
Ramana G reddy acipco “Novel applications of ionic liquids in materials processing” Journal of Physics:Conference Series 165 (2009) 012076
Paisarn Naphon et. al., “Experimental investigation of titanium nanofluids on the heat pipe thermal efficiency”International Communications in Heat and Mass Transfer 35 (2008) 1316–1319.
