Determination the Stress and Deformation of the Cannon Barrel When Fired
Downloads
This paper presents a calculation process of the stress field of the 130M46 cannon barrel when firing under the load of gas pressure and temperature. The paper will focus on calculating the stress of a barrel and solving some disadvantages of previous methods using the finite element method and the simulation tools of the CFD software. The calculation results are the stress and deformation parameters of the barrel such as normal stress, tangential stress, average stress, radial deformation, tangential deformation, and total displacement. These stress values are determined when firing 1 shot and 8 consecutive shots to determine the allowable durability limit of the gun barrel material. The result of this research can be used to study and analyze some similar technical issues in weapons.
Chuev Yu.V. , Design of barreled complex, Mechanical engineering, Moscow, 1976 (in Rusian).
Lavit I.M., Tolokonnikov L.A., Low-cycle fatigue of hollow cylinders loaded with internal pressure,
Izv. TulGU, Problems of special engineering, 1997, ssue 1, pp. 124-128 (in Rusian).
Bui Quy Viet, Research on stress state of cannon barrel with spiral groove when firing, Vietnam
Mechanics Journal, 2014 (in Vietnamese.
Jiri Balla, Van Dung Nguyen, Zbynek Krist, Minh Phu Nguyen, Van Bien Vo, Study Effects of Shock Absorbers Parameters to Recoil of Automatic Weapons, 2021 International Conference on MilitaryTechnologies (ICMT)DOI: 10.1109/ICMT52455.2021.9502825.
C.H. Wang, and M.W. Brown, Life Prediction Techniques for Variable Amplitude Multiaxial Fatigue-Part I: Theories. ASME J. Eng. Mater. Technol., 118 (3), 1996: 367–370.https://doi.org/10.1115/1.2806821
L. Popelinsky, J. Balla, High rate of fire automatic weapons – design and projecting, Textbook. University of Defence, Brno, Czech Republic, 2004.
I.M. Snyman, The Numerical Simulation of Projectile/Barrel Interaction. 15th International Symposium on Ballistics, May 21–24, 1995, Jerusalem, Israrel.
H. Keinänen et al. Influence of rotating band construction on gun tube loading—Part I: Numerical approach. Journal of pressure vessel technology, 134 (4), 2012.https://doi.org/10.1115/1.4006354
Tien, V. D., Macko, M., Procházka, S., & Bien, V. V. (2022). Mathematical Model of a Gas-Operated Machine Gun. Advances in Military Technology, 17(1), 63–77.
NGUYEN, D.P., B.V. VO, M. MACKO, and T.V. DANG. “Research Technical Solution for Reducing Oscillations of Weapons Mounted on the Vehicle,” In: International Conference on Military Technologies 2021. Brno: IEEE, 2021, pp. 1-6.
Van Bien Vo, Stanislav Beer, Tien Sy Ngo, and Duy Phon Nguyen, "The Effect of The Nozzle Ultimate Section Diameter on Interior Ballistics of HV-76 Trial Gun," 2019 International Conference on Military Technologies (ICMT), 2019, pp. 1-6
Shabana, Ahmed A. Dynamics of multibody systems. Cambridge university press, 2020.
D. D. Tran, M. Phu Nguyen, V. B. Vo, D. P. Nguyen, M. Macko and M. Vitek, "Analysis of gas flow losses in a gas-operated gun," 2023 International Conference on Military Technologies (ICMT), Brno, Czech Republic, 2023, pp. 1-7, doi: 10.1109/ICMT58149.2023.10171337.
J. Balla, V. D. Nguyen, Z. Krist, M. P. Nguyen and V. B. Vo, "Study Effects of Shock Absorbers Parameters to Recoil of Automatic Weapons," 2021 International Conference on Military Technologies (ICMT), Brno, Czech Republic, 2021, pp. 1-6, doi: 10.1109/ICMT52455.2021.9502825
P.N. Thieu, K.Đ. Tuy, Typical armament of synthetic weapons, part 5. Military Technical Academy, Hanoi, 2004. (in Vietnamese)
BALLA, J., L. POPELÍSKÝ and Z. KRIST. Theory of High Rate of Fire Automatic Weapon with together Bound Barrels and Breeches. WSEAS Transactions on Applied and Theoretical Mechanics, 2010, 5(1), pp. 71-80. ISSN 1991-8747
BEER, S., L. JEDLIČKA, and B. PLÍHAL. Barrel Weapons Interior Ballistics (in Czech). Brno: University of Defence, 2004. ISBN 978-80-85960-83-9. https://doi.org/10.3849/aimt.01487
Doan, D. V., Bien, V. V., Quang, M. A., & Phu, N. M. (2023). A STUDY ON MULTI-BODY MODELING AND VIBRATION ANALYSIS FOR TWIN-BARREL GUN WHILE FIRING ON ELASTIC GROUND. Applied Engineering Letters, 8(1), 36-43.
V. van Bien, L. Dobsakova, N. Van Dung, D. P. Nguyen, T. D. Nguyen and M. P. Nguyen, "A Study on Firing Stability of Howitzer Mounted on Wheeled Vehicles," 2023 International Conference on Military Technologies (ICMT), Brno, Czech Republic, 2023, pp. 1-7, doi: 10.1109/ICMT58149.2023.10171322.
Van, B. V., Phon, N. D., & Phu, N. M. (2023). Study of the Effect of Some Muzzle Device Types on the Firing Force and Firing Impulse. Archives of Advanced Engineering Science, 1-8.
Leslie Banks-Sills, R. Eliasi, Fatigue life analysis of a cannon barrel, Engineering Failure Analysis,Volume 6, Issue 6, 1999, pp. 371-385,https://doi.org/10.1016/S1350-6307(98)00054-5.
Chao-bin Hu, Xiao-bing Zhang, Influence ofmultiple structural parameters on interior ballistics based on orthogonal test methods, Defence echnology, Volume 15, Issue 5, 2019, pp. 690-697, https://doi.org/10.1016/j.dt.2019.06.014.
ia Sun et al., Analysis of gun barrel rifling twist, AIP Conference Proceedings, 2017,https://doi.org/10.1063/1.4982461
Zienkiewicz O.C., Taylor R.L., The finite element method. Oxford: Buttenworth, Heinemann, 2000
Morozov E.M., Muizemnek A.Yu., Shadsky A.S., Ansys in the hands of an engineer: Fracture echanics, Lenand, Moscow, 2008 (in Rusian)
Laham S.Al., Stress Intensity Factor and Limit Load Handbook, British Energy Generation Ltd, United Kingdom, 1999.
M. Macko, B.V. Vo, Q.A. Mai, Dynamics of Short Recoil-operated Weapon. Problems of Mechatronics. Armament, Aviation, SafetyEngineering, 12(3), 2021: 9-26.
N. T. Sy, S. Beer, V. V. Bien, N. D. Phon and N. M. Phu, "Oscillation of the Anti-tank Missile System Fagot Fired on the Elastic Ground," 2019 International Conference on Military Technologies (ICMT), Brno, Czech Republic, 2019, pp. 1-5, doi: 10.1109/MILTECHS.2019.8870069
Nguyen, T. H. ., & Nguyen, M. P. . (2022). Vibration of launcher on multiple launch rocket system bm-21 with the change of rocket’s mass center when fired. Journal of Science and Technique, 14(03). https://doi.org/10.56651/lqdtu.jst.v14.n03.443
N.H. Lanh, N.T. Hai, Non-stop heat conduction methods. Peoples’s army publishing House, Ha Noi, 2004.
