In this research, a polymer composite material was prepared from two polymers (Epoxy resin- Resole resin) and reinforced by fiber glass, The phenol formaldehyde resin was used with different weight ratio ( 10% , 20% , 30% , 40% ) , with epoxy resins of varying proportions ( 90% , 80% , 70% , 60% ) at 20C° (included: shock resistance, tensile strength, and bending resistance ), analysis and comparison with the mechanical properties of the alloy, including the part chosen for the purpose of replace the alloy with compound material for weight loss and improve mechanical properties.
Dr. Mustafa A. Rajab, Ekhlas I. Kader, Ali A. Hamod, Abdul Hameed I. Hameed “Mechanical properties of silica, graphite and carbon fiber reinforced composites” , International Journal of Engineering and Technology (IJET) , Vol. 9 No 5 Oct-Nov 2017.
Materials design, “Effect of resin molecular Architecture on Epoxy thermoset mechanical properties”, materials Design, Inc., (2013).
Dr. Mustafa A. Rajab, Dr. Ali Adwan Hammod, Dr. Ekhlas I. Kader, Abdul Hameed I. Hameed. ((Mechanical properties (Tensile, Hardness and Shock resistance) for the phenol formaldehyde resin with Epoxy resin.)) , Diyala Journal of Engineering Sciences 4 (2018) 55 – 60.
Zakya Rubab, Adeel Afzal Humaira M. Siddiqi, and Shaukat Saeed, “Augmenting thermal and mechanical properties of epoxy Thermosets: The role of thermally-treated versus surface-modified TiO2 nanoparticles”, material express Vol.4, No.1, pp.54-64, (2014).
Dr. Mustafa A. Rajab, Ekhlas I. Kader, Ali A. Hamod, Abdul Hameed I. Hameed ", Mechanical Properties of Silica, Graphite and Carbon Fiber Reinforced Composite Materials", International Conference on Contemporary Global Challenges of Interdisciplinary Academic Research and Innovation Cairo, Egypt on October 27-28, 2017.
A.H. Conner, “Wood: Adhesives,” Encyclopedia of materials: science and technology. Amsterdam; New York: Elsevier Science, Ltd., 2001, pp. 9583-9599.
Dr. Mustafa A. Rajab, Abdul Hameed I. Hameed, “Hardness and Wear Resistance of Composite Materials Reinforced by Silica, Graphite and Carbon Fiber”, Fourth edition of the International Congress of the Water Management, Energy, Food and Agricultural Techniques Istanbul Turkey, 7-10 November 2017.
Urmimala Maitria, K. Eswas Prasad, U. Ramamurty and C. N. R. Rao, “Mechanical Properties of Nano Diamond-Reinforced Polymer Matrix Composites”, Solid State Communication Journal, Elsevier Ltd., 2009.
Dr. Mustafa A. Rajab, Dr. Ekhlas I. Kader, Abdul Hameed I. Hameed.., “: FLEXURAL AND SHOCK STRENGTH OF SILICA, GRAPHITE AND CARBON FIBER REINFORCED COMPOSITE MATERIALS”, 5th International Conference on Innovation Challenges in Multidisciplinary Research Practices (ICMRP-December 15-16, 2017) Singapore.
P.K. Mallick “Fiber-Reinforced Composites: Materials, Manufacturing, and Design”, 3rd Edition, CRC Press, 2007.
Dr. Mustafa A. Rajab, Ekhlas I. Kader, Abdul Hameed I. Hameed “Study the Mechanical Behavior of Advanced Composite Materials ” , Second Scientific Conference - Faculty of Bilad Rafidain - University , 18-19 April 2017, Iraq.
Jean-Marie Berthelot, “Composite Materials: mechanical behavior and Structural analysis”, Springer, USA, (1999).
Dr. Mustafa A. Rajab, Ekhlas I. Kader, Abdul Hameed I. Hameed “Study the Thermal Behavior of Advanced Composite Materials ”, The First International Scientific Conference for Graduate Student Research, 24-25 May 2017.
Dr. Mustafa A. Rajab, Ali I.Al-Mosawi, Ekhlas I. Kader, Shaymaa A. A, Abdul Hameed I. Hameed”, Characteristics of Toughness and Flexural of Composite Materials Supported by Silica, Graphite and Carbon Fiber Reinforced" Conference of the College of alkitab- University – 18 October 2017 , Iraq.