Designing Typical Malang Handicraft Products Through the Utilization of Sawdust at Micro and Small Enterprise
Downloads
This article examines the use of sawdust as a souvenir product with resin material at MSEs Berdikari Meubel Nusantara, a furniture manufacturer specializing in high quality products made from mahogany, pine, and teak. The author describes the process of making souvenir products using sawdust and resin, including map and text planning and modeling, map area coloring, map pasting, text, and legends on frames. The article also discusses challenges encountered during the design process, such as the difficulty of creating detailed designs for small-sized objects and the need for knowledge of abstract art and frame sizes. In addition, the authors examine the limitations of the production process, including the risk of damage during map formation and the length of time it takes to complete the work. This article provides valuable insights into the use of sawdust as a souvenir product and the challenges encountered during the design and production process, making it a useful resource for those interested in making high-quality souvenir products.
O. L. Rominiyi, B. A. Adaramola, O. M. Ikumapayi, O. T. Oginni, and S. A. Akinola, “Potential Utilization of Sawdust in Energy, Manufacturing and Agricultural Industry; Waste to Wealth,” World J. Eng. Technol., vol. 05, no. 03, pp. 526–539, 2017, doi: 10.4236/wjet.2017.53045.
I. S. Aisyah, “Pelatihan pemanfaatan limbah serbuk kayu dan perca kain untuk kerajinan suvenir.,” Pros. Semin. Nas. Unisla, pp. 305–309, 2018.
D. R. Obadă, D. C. Dabija, and G. I. Fârte, “Consumer perception towards electronic products from recycled components in the current geopolitical context: A structural equation modelling approach,” Heliyon, vol. 10, no. 4, Feb. 2024, doi: 10.1016/j.heliyon.2024.e26475.
M. Taufiqurrohman and M. Yusuf, “Pemanfaatan Energi Terbarukan dalam Pengolahan Daur Ulang Limbah,” J. MENTARI Manajemen, Pendidik. dan Teknol. Inf., vol. 1, no. 1, pp. 46–57, Sep. 2022, doi: 10.33050/mentari.v1i1.141.
V. Agarwal, K. Mathiyazhagan, S. Malhotra, and B. Pimpunchat, “Building resilience for sustainability of MSMEs post COVID-19 outbreak: An Indian handicraft industry outlook,” Socioecon. Plann. Sci., vol. 85, Feb. 2023, doi: 10.1016/j.seps.2022.101443.
C. Raditya Konore, I. F. Pingkan Rorong, H. FDjSiwu, J. Ekonomi Pembangunan, and F. Ekonomi Dan Bisnis, “KAJIAN PRODUKSI KERAJINAN TANGAN SERAT PISANG ABAKA DI DESA ESANG KABUPATEN KEPULAUAN TALAUD,” 2022.
L. A. G. Pieter, A. Sudomo, Suhartono, A. Widiyanto, and M. M. B. Utomo, “Application of silvicultural treatments to improve local Gigantochloa apus (Schult. & Schult.f.) Kurz ex Munro stands for supporting handicraft industries in Gunungkidul region, Indonesia,” Adv. Bamboo Sci., vol. 7, May 2024, doi: 10.1016/j.bamboo.2024.100076.
C. Nigel, Engineering Design Methods: Strategies for product design, Fifth Edition. 2021.
K. . & E. S. Ulrich, Product Design and Development; Sixth Edition., Sixth Edition. 2016.
F. B. Watts, Bill of Material (BOM) Process," in Configuration Management Metrics,. Elsevier, 2010.
S. Arif, D. Irawan, and M. Jainudin, “ANALISIS SIFAT MEKANIS PERBANDINGAN CAMPURAN KOMPOSIT SERBUK GERGAJI KAYU JATI DENGAN MATRIK EPOXY UNTUK MATERIAL KAMPAS REM CAKRAM,” J. Technopreneur, vol. 7, no. 2, pp. 58–63, Nov. 2019, doi: 10.30869/jtech.v7i2.385.
D. Sugan Darsa and M. Rizki, “KARAKTERISASI KOMPOSIT RESIN EPOKSI SERBUK KAYU”, [Online]. Available: http://snf-unj.ac.id/kumpulan-prosiding/snf2015/.
M. Rofieq, S. Soeparmanb, and S. Herminingrum, “HANDICRAFT PRODUCT DESIGN FOR MICRO AND SMALL ENTERPRISE IN MALANG TOURISM,” 2018.
Y. Stephanie and P. Wisnu Anggoro, “RANCANG BANGUN SUVENIR TEMPAT KARTU NAMABERCIRI KHAS YOGYAKARTA,” Simp. Nas. RAPI XIII-2014 FT UMS.
B. R. SUSANTO, “Perancangan Prototype Souvenir Umbul Ponggok,” Universitas Atma Jaya Yogyakarta, Yogyakarta, 2018.
