Saving the Use of Elpigi Gas in the Oven Machine (Calcination) Using the Energy Saving Mode Method at PT. ABC
Downloads
Energy has become a basic need and as one of the main components in the industry, one of which is the ABC factory, one of the efforts to reduce production costs without affecting the results or quality of production is by means of safe energy modes PT. ABC is a manufacturing company engaged in the machinery industry which produces catalyst products for two-wheeled vehicles and four-wheeled vehicles. Broadly speaking, there are several stages of the catalyst manufacturing process, namely the Slury material preparation stage, the process of inserting material into the catalyst on the Cyzec machine, the material gluing process on the Calcination Oven machine, the OK product stamp process, the Final Inspection process. This research was conducted on the Drying oven machine, the line that uses elpigi gas. Based on the period January - June there has been an increase in the amount of gas bills used, After using the Energy Safe Method the amount of gas used decreased by 1 cubic every day and saved expenses in the period January - April.
3D Robotics. (2023, January 20). Dronekit Python Readthedocs. Retrieved from 3D Robotics: https://dronekit.python.readthedocs.io/en/lat est/examples/channel_overri des.html.
Brahmaseta, H., & Yasa, U. F. (2018). Effect of Drying Process on Top Coat Finishing in Motor Vehicle Body Component Painting. Journal of Mechanical Engineering Education, 1-7.
Dirja, I., & Jihan, M. A. (2019). Design of a water heater using a battery based on Arduino Pro Mini. Karawang: University of Singaperbangsa Karawang.
E, S. Sumadi. (2019). "Temperature and humidity control system. Uniba Electrical Engineering Journal, III, 13-18.
Fahruddin, A., As'ad, A. I., mulyadi, & Tjahjanti, P.
H. (2022). Effect of Temperature Variation and Air Velocity Using Cabinet Dryer. SENARA, 840-844.
Khuluq, M. K., Pratahtya, A., Imansyah, R. T., & Tamami, N. (2023). Development of Autonomous UAV for Delivery System with Adaptive Sliding Mode Control Optimizer and Kalman Filter. BULLETIN OF NATIONAL STUDENT FORUM ON INFORMATION AND COMMUNICATION TECHNOLOGY, 16-22.
Muradi, R., & Kartika. (2023). Fish Dryer With Temperature Control. IJESTY, III, 1-8.
Ramadhani, Y., Supriyanti, R., & Aliim, M. S. (2023). PPM Solar Lighting for Public Facilities for Blater Purbalingga Village Residents. Renata Journal of Community Service for All of Us, I, 53-57.
S, Al-Fajri (2022). MSI Transaction on Education Design of Fish Dryer by Monitoring Temperature and Humidity Based on Internet of Things (IoT) MSI Transaction on Education. Chemica, VIII, 66-76.
Somadi. (2020). Evaluation of Delay in Delivery of Goods Using the Six Sigma Method. J. Logistics Indon, IV, 81-93.
Suprihanto, D., Nugroho, H., Burhandenny, A. H., Harjanto, A., & Akbar, M. (2023, February). PROTOTYPE OF THE INTERNET OF THINGS-BASED SWALLOW BUILDING. Journal of Informatics Engineering, IV, 131- 141
