Computer Aided Fuzzy Control Charts for Evaluating and Analyzing Variable Data
Downloads
One of the limitations of fuzzy control charts is the complexity of their mathematical relations, and there is no software built to draw and analyze the fuzzy control charts. This research presents a visual presentation of fuzzy control charts for variables ( , , I-MR), using an integrated program built by MATLAB20 to draw and analyze fuzzy control charts, A real case study was conducted of data collected from the Al-Numan factory for a plastic connecter product. The number of attempts to reach the approved control limits was less in the fuzzy charts, as well as the number of deleted samples in the fuzzy charts was less. It was also noted that the process capability indicators decreased after data fuzzing, they were equal to (3.049) and became equal to (3.013) after fuzzing. This is due to the increase in the standard deviation of the process.
Alakoc N. P.; Apaydin A., (2018), “A Fuzzy Control Chart Approach for Attributes and Variables”, Engineering, Technology & Applied Science Research, Vol. 8, No. 5, pp. 3360-3365.
ÖZDAĞOĞLU A.; ÖZDAĞOĞLU G.; GÜLER M. E., (2018), “Developing Quality Control Charts for the Control Points of A Food Product”, International Journal of Contemporary Economics and Administrative Sciences, Vol.8, No. 2, pp.89-113.
Montgomery D., (2013), “Introduction to Statistical Quality Control”. seventh edition. Arizona State University.
Enad F. H.; Jaber A. G., (2020), “Using Kernel Density Estimator to Determine the Limits of Multivariate Control Charts”. Journal of Economics and Administrative Sciences, Vol.26, No. 124,pp. 443-459.
Kahraman C.; Kabak Ö., (2016), “Fuzzy Statistical Decision-Making Theory and Applications”. Studies in Fuzziness and Soft Computing, Springer Nature, Switzerland.
Hamada A. A; Melik H. N.; Raheem S.H, (2020), “The Use of Fuzzy Logic Theory in Control Charts (A Comparative Study)”. International Journal of Innovation Creativity and Change, Vol.11, No.7,pp. 389-402.
Al obeidy N. Q.; Alkhafaji A. A., (2018), “Improving the Statistical Process Control Chart by Applying a DNOM Chart for Multiprocessor Products”. 2nd International Conference on Engineering Sciences.
Mustafa H.; Asmaa F.; Jaber G., (2021), “Comparison of Some Non-Parametric Quality Control Methods”. Journal of Economics and Administrative Sciences, Vol.27, No.130, pp. 197-209.
Akeem A.A., (2018), “Performance of fuzzy control chart over the traditional control chart”. Benin Journal of Statistics, Vol.1, No.2018, pp.101-112.
Zafirah N.A.; Basri A.; Rusiman S.; Roslan R.; Mohamad M.; Khalid K., (2016), “Application of Fuzzy X ̅-S Charts for Solder Paste Thickness”. Global Journal of Pure and Applied Mathematics. Vol.12, No.5, pp. 973-1768.
Senturk S.; Erginel N., (2009), “Development of fuzzy X ̅-R and X ̅-S control charts using α-cuts”. Information Sciences, Vol.179, pp. 1542–1551.
Dilipkumar R.; Nanthakumar C.,(2019), “Construction of Fuzzy Mean Using Standard Deviation X ̅ - S Control Chart with Process Capability” International Journal of Recent Technology and Engineering, Vol. 8, No.4, pp. 5390-5396.
Kaya I.; Erdogan M.; Yildez C., (2017), “Analysis and control of variability by using fuzzy individual control charts”. Applied Soft Computing Journal. Vol.51, pp.370-381.
Alwan N. Q.; Ahmed A. A.,(2018), “Comparison Between (X ̅ – R) Charts in Traditional and Deviation Nominal Methods with Usage Process Capability Analysis”. Association of Arab
Al -Khafaj A.A.; AL -Mendwi K. A.; Al-saady D.M.H.,(2012), “Adjusting off-centering process for a blow molded plastic product by use of WINQSB software”. Journal of Engineering, Vol.18, No.4, 2012, 518-534.
