Research on the Influence of Some Factors on the Departure Angle of Warheads When Firing a Series

Rotating part Shot temperature departure angle interior ballistic barrel design

Authors

  • Vo Van Bien The Faculty of Special Equipments, Le Quy Don Technical University, Hanoi, Viet Nam
  • Hoang Duy Vinh Logistics - Technical Department, Nguyen Hue University - Second Army Academy, Ho Chi Minh City, Vietnam.
  • Tran Van Manh Advisory - Administrative Department, Nguyen Hue University - Second Army Academy, Ho Chi Minh City, Vietnam.
  • Nguyen Minh Phu The Faculty of Special Equipments, Le Quy Don Technical University, Hanoi, Viet Nam
November 17, 2023
November 21, 2023

Downloads

In this article, the equation for determining the projectile's departure angle taking into account the effects of several shot parameters is established. The parameters of the shot include the speed of rotation around the axis of the rotating part when fired; and the curvature of the barrel due to the temperature of the shot. Numerical calculations are applied to 37mm anti-aircraft guns. Research results show that: The speed of rotation around the axis of the rotating part when firing has a significant effect on all types of artillery, especially on long-barreled artillery; While the shot temperature significantly affects the departure angle of the warhead when firing in series. This influence causes errors in the firing. The departure angle becomes larger as the rotation speed becomes faster; The departure angle of the bullet when firing the 5th, 10th, and 15th bullets is 0.0117, 0.015, 0.0175, 0.0185, 0.0199, and 0.0206 rad, respectively, when taking into account the shot temperature. This result is used as data to provide effective barrel design solutions and barrel cooling methods